24
MARS
GB
• Unpack the appliance and remove the accessories.
• Release bother canister clips.
• Remove motor head from the canister by means of the
carrying handle.
• Take off the textile filter.
• Remove contents from the canister.
• Pull the reinforced opening of the dust bag over the
connection socket and fasten it by turning it slightly
• Reinsert the textile filter.
• Reinstall motor head and fasten the retaining clips.
• Push the end of the suction hose into the suction socket
of the canister as far as it will go. For release of the
suction hose press button.
• Place on the required nozzle.
Suction accessories
The appliance is provided with a 32 mm diameter system
for accessories as standard. All the usual domestic
vacuum cleaning tasks can be undertaken with this
system. All the nozzles can be attached directly to the
handle or to the suction tube, as required.
Dust bag
This bag should be used to vacuum dry household dust. It
is easy and hygienic to replace.
Textile fine dust filter
This bag should be used to vacuum dry, very fine dust.
Motor protection filter / foam filter
The foam filter protects the blower if the dust bag becomes
damaged beyond use. It covers the ribs of the float valve
and serves as a flexible support for the dust bag at the
same time.
Assembly
WARNING!
Prior to assembly, make sure that the mains plug is
unplugged. If the mains plug is plugged in, the appliance
could accidentally be switched on, resulting in injuries.
