18
3- Erasing Memories
You may erase one or all memories. To delete one
record:
Step 1: Press and release MEMORY button to display
records. Press and release MEMORY button again to
choose the record that you wish to delete.
Step 2: Press and hold the POWER button until the
display shows "DEL".
Step 3:Press and hold the POWER button. After three
beeps are heard, the selected record is deleted.
To delete all memories : Follow steps 1 and 2 above.
Step 3: Press the MEMORY button again and the display
shows "DEL ALL".
Step 4: Press and hold the POWER button. After three
beeps are heard, all records are deleted.
4- Setting the Clock/Timer
Press and hold the MEMORY button for over three
seconds. The display will show a blinking year. Press
the POWER button to adjust the year when it is blinking.
Then pres MEMORY button again, "month" will appear
and blink to be adjusted, and then "date", "hour" and
"minute" will follow as you press and release the
MEMORY button repeatedly.
To adjust the clock Press the POWER button to adjust
the values of "month", "date", "hour", and "minute" when
they are blinking.
SPECIAL CASES
If the following circumstances occur:
1) After pressing the ON/OFF key the reading does not
start.
• Check the batteries and replace them if needed.
• Clean the contacts of the batteries with a dry cloth.
2) Nothing appears on the display when the MEMORY
key is pressed.
• The stored data have been deleted.
3) The batteries do not last long.
• Use alkaline batteries to increase working autonomy.
If normal zinccarbon batteries are used they will need
changing more often.
4) You cannot complete a reading.
• Check the batteries and change them if needed.
5) The blood pressure levels are different with each
reading - the readings are very low or very high.