Fakir HYPO CLEAN, User Manual

Page: 21 / 72

21
EN
• If the power cord of this appliance is damaged, it must be replaced by the
manufacturer or the manufacturer’s customer service department or a person with
similar qualifications to prevent any hazards. Never operate a defective appliance or
an appliance with a defective power cord. There is a danger of electric shock.
• The children are not aware of the threats posed by the electrical appliance. Do not
ever let children to play with electrical appliances.
• Repairs and maintenance may by performed only by trained technicians (e.g. Fakir
customer service). Improperly repaired or serviced appliances may pose a danger to
the user.
• Do not kink, pinch or run over the power cord and do not expose it to heat sources.
• Never place the appliance or its power cord directly onto hot surfaces or in the vicinity
of open flames.
• Do not ever use your appliances outside. Do not expose the appliance to moisture or
rain and do not operate with wet hands.
• Never leave the appliance unattended when it’s switched on. Unplug the appliance
when interrupting your work.
• Do not put the appliance in operation if you detect any visible damage, if the power
cord is defective or if you suspect a defect (e.g. after a fall).
• Do not put any liquid other than water in the spray bottle, the appliance is designed to
work with water only.
• Do not fill the spray bottle beyond the maximum filling level of 400 ml. (minimum filling
level: 200 ml)
• Attention! In case of non-observance the water spills over.
• Fill the spray bottle with mamimum 400 ml of water up to the marking line and add
just a spoonful of salt (maximum: 0.5 g) with the included, orange measuring spoon.
Shake well, to dissolve the salt. If the water is insufficient, too much salt has been
added or if the salt has not completely dissolved, malfunctions can occur and the
device may be in warning mode.
• After adding the salt, the electrolysis process is started by pressing the operating
button.
• ATTENTION! The cleaning agent must be completely used up before you start a new
electrolysis process. Failure to do so will result in an overly concentrated cleaning
solution.
• Use only the included salt or over 99% refined salt. Do not add anything else to the
water in the spray bottle. Do not use processed salts, such as rock salt, iodized salt
or bamboo salt.
• Take care not to cause any discoloration and/or deformation when using on fabric,
leather and metal.
• Place the appliance on a flat and level surface. Do not move the appliance during
electrolysis.
• Do not operate the device more than 3 times in quick succession. This can lead to
overheating and damage.
• Do not touch the hot connection terminals on the station after the operation is
completed.
• Do not store the electrolyzed water in other bottles or in the refrigerator.
• It could be mistaken for drinking water. ATTENTION! No drinking water.
• Do not allow the adapter and the station to come in contact with water.
• Do not touch the adapter or the plug with wet hands.