16
EN
WARNING!
Put tap water in the water tank. Do not put in perfume, vinegar or chemically descaled
water or other liquids.
• Before filling the appliance with water, unplug the appliance.
• Wait for the appliance to completely cool down if heated.
• Remove the water tank by pulling it towards you.
• Remove the tampon.
• Fill the water tank at MIN and MAX levels and close it safely. Make sure that the
tampon is correctly positioned.
• Push the water tank until it clicks into place.
Operation
• Hold the appliance vertically and attach the fabric brush to the steam header. You can
attach the fabric brush from both sides. When the fabric brush is mounted on the steam
head, a click sound is heard.
• Plug in the appliance. Touch the on/off touch sensor for 2 seconds. The blue light
starts flashing and the device starts to warm up, then the dense steam output sensor
is automatically selected and the red light is on. When the blue indicator light is lit
continuously, the device is warmed up and ready to use. You can adjust the steam
output by touching the steam sensors. Review the following table for the steam setting
recommendation that you can select according to the fabric type.
Type of Fabric
Steam Setting
Cotton / Linen
Silk / Wool
Synthetic
Dense
Standard
NOTE!
Your Garment Steamer has a smart automatic shut-off function. When the device is
not used for about 10 minutes, it switches itself off and the blue indicator light starts
flashing.
• To start steaming, keep the appliance upright and keep the steam head away from you
and press the steam trigger.
When you bring the steam lock ring to the open ( ) position, you must press and
hold the steam trigger to send steam. When you set the steam lock ring to the off ( )
position, the appliance sends steam automatically.
