Fakir ExeCute 2 Blade, User Manual

Page: 33 / 92

33
EN
1. Attach the hair clipper to your appliance. There are 4 hair trimming combs for you to adjust
the length of the cut. You can adjust the length of your hair as 4mm-9mm-12mm or 16mm.
2. Attach the hair trimming comb in a way that the notches on the sides are inserted into the
slots of the attachment.
3. We recommend you to comb your hair before cutting.
4. Operate the appliance and start cutting from the sides to the top of the head by pressing
the comb attachment to your head.
5. Keep cutting with the same technique by starting from the sides of the head and the nape
towards the top of the head.
6. Trim the top of the head by moving from the front to the back.
NOTE!
We recommend using the extra-wide hair clipper without a guard to cut your hair too short
or to trim the area around the nape and ears.
WARNING!
The blades of your hair clipper are very sharp without a guard.
CAUTION!
The blades should be used very carefully when they are not equipped with a comb.
Hair Trimming Combs
For clipping and trimming your hair as you wish, attach the hair trimming combs to the hair
clipper. The product comes with 4 hair trimming combs (4mm, 9mm, 12mm, 16mm) and 2
sideburn trimming combs. Hair length settings are shown on the combs. Settings correspond
to the hair remaining after cutting.
Trimming Nape & Neck and Ears
For trimming nape & neck and ears, hair trimming combs should be attached to your
appliance.
1. Put the hair clipper on the area you want to trim so that only one edge of it meets the hair.
2. Trim to form the neck and ear line by moving it slowly.