29
GB
USAGE
Cleaning
Tiled Floors
E-
Tiled floor cleaning attachement for f"E carpet spray
extraction nozzle. Push the attachement onto the carpet
spray extraction nozzle, then proceed as described under
"spray extraction of carpeted floors" above.
F-
The tiled floor cleaning attachement can simply be
pulled off when no longer required.
Cleaning
Upholstery
G-
The upholstery cleaning nozzle is supplied for the
purpose of cleaning upholstery, car seats etc. To seperate
the connection, turn the bayonet fitting in the opposite
direction and pull off.
H-
Now proceed as following:
• Set the control switch to maximum suction power.
• Switch t on the appliance by light pressure on the
ON/OFF switch.
• Start the pump by applying light pressure to the switch.
I-
Place the upholstery cleaning nozzle lightly on the
upholstery, pull the button of handle, moving the nozzle
slowly backwards at the same time. In this way the
cleaning solution is sprayed under pressure onto the dirty
area and is immediately sucked up again together with the
dirt. The entire area is covered by cleaning adjacent strips.
NOTE!
If, temporarily no spray extraction liquid is needed;
switch off the pump.
