16
EN
NOTE!
Make sure that the water you put in the appliance does not exceed the maximum
level.
NOTE!
Always move your device by holding it from its handle as the outer edges may be
hot.
CAUTION!
While pouring water into device, make sure it is not on the power base.
NOTE!
If you want to have a foamy layer on top of your coffee, take the device away from
the power base when the coffee starts to boil and fill your cups by half while the
coffee is still boiling Put your device back to the power base and repeat the steps
again. When the coffee is done, pour it into the half-filled cups, and enjoy your coffee.
Boiling water with the appliance
Pour water into compartment of the device, making sure the water does not exceed the
maximum level. If water exceeds the maximum level on the coffee pot, the water may
spill over when it boils.
Turn on the device by setting the on / off switch to ““I”” position.
Turn off the device by setting the on / off switch to ““0”” position when water starts to
boil. Since your device will not turn off automatically, you should set the on / off switch
to ““0”” mode
CAUTION!
Never boil milk in the device. Otherwise the milk will stick on the heater and create a
blackish-brown layer. And this will harm the device. With this device, you can only boil
water or make coffee. Do not use for any other purposes.
