ALWAYS WEAR
SUITABLE PROTECTION
General Safety Rules
Introduction
The FAISPRAY12HD Professional
Sprayer is fitted with VITON™ seals which
are resistant to most acids and solvents,
enabling this sprayer to be used with
more aggressive chemicals widely used in
automotive and professional cleaning and
some agricultural applications.
It is always advisable where possible to
use water-based product as these are less
damaging to the environment.
Use of aggressive chemicals will inevitably
shorten the working life of these seals.
■ When using garden pesticides, herbicides,
insecticides, fungicides or any other form
of garden chemical always obey the
manufacturer’s instructions fully.
■ Do not use petroleum based products in
this sprayer.
■ Do not spray toxic or harmful liquids on
persons, animals or foodstuffs.
■ For certain weed killers and pesticides,
trace elements may always remain.
Consult the product manufacturer’s
instructions, but in such cases, it is
recommended that once such products are
introduced, then the sprayer should only be
used for that specific application thereafter.
■ Consult the products manufacturer’s
instructions about safe and lawful disposal
of excess product when emptying unused
product from the tank and during the
cleaning process. (Many products cannot be
disposed of in drains and sewers).
■ Strain any mixtures that contain sediments
before introducing product to the tank. Strain
through a fine sieve or cloth.
■ Wear the appropriate protective equipment
coverall, gloves, goggles and suitable
respiratory mask. For details of a complete
range of protective equipment, visit the
SCAN Safety Website at www.scan-safety.com
■ Avoid contact with the skin and eyes, do not
eat, drink or smoke when using the sprayer.
■ Wash hands and face after use.
■ Do not leave the sprayer within the reach of
children.
■ Keep bystanders away whilst using the sprayer.
■ Always direct the spray downwind as
spraying into the wind will result in operator
contamination.
■ Do not leave the sprayer exposed to heat
sources or intense cold.
■ Release pressure after each use, even if you
are going to recommence spraying in a few
minutes.
■ Ensure pressure is released before attempting
to remove the pump assembly mechanism.
■ Do not pressurize by any means other than
pumping.
Working capacity:
12 Litres
Working pressure: 2.5 bar
Net weight:
3.650kg
Area coverage: 80M
2
- 300M
2
Specifications
