front
back
sides
bottom
3D HUBS
Fairphone case printing set up
These instructions are meant as a guideline for printing Fairphone cases. We experienced the best
results with the following settings in Makerware for our Replicator 1, 2 and 5th Gen.
These settings are meant as guidelines. You may tweak them to optimize results.
Just bear in mind that the result has to be usable as an end product.
Infill:
10%
Number of Shells:
3
Layer Height:
0.20 mm
Quality
Material:
PLA
Raft:
yes
General
Extruder:
230 ºC
Temperature
Speed while extruding:
60 mm/s
Speed while traveling:
150 mm/s
Speed
