Fairland IDHR120, Installation & User Manual

Page: 8 / 23

4
FOR USER
mode
(2)
Both Dehumidifying and Heating Function:
Press for 3 seconds, the or or + will flash, before it stops flashing, press to choose
or or + circularly, which means “Heating”“Dehumidifying”“Heating + Dehumidifying”
A
．
Dehumidifying Function: Press one time
，
it can transfer the mode between and .
Default is mode
B. Dehumidifying and Heating Function: Press one time
，
it can transfer the mode between
and . Default is smart mode
3. Humidity/Temperature Setting
(1)
Dehumidifying Function only:
Press or to set the humidity. The humidity setting range is 30-95%. The default is 70%
(2)
Both Dehumidifying and Heating Function:
A. Under the dehumidifying mode, press or to set the humidity. The humidity setting range is
30-95%. The default is 70%
B. Under the heating mode, press or to set the temperature. The temperature setting range
is 18~35°C. The default is 26 ° C
C. Under the h dehumidifying mode, press the for the first time, the humidity number
flashes, press or to set the desired humidity. Automatically confirm and exit after 5
seconds without button operation. Press , the temperature number flashes, press or to
set the desired temperature before the flashing stops and automatically confirm and exit after 5
seconds without the button operation.
4. The symbol will be displayed on the screen when the electric heater is turned on. Under the
h dehumidifying mode, the priority dehumidification function is preferred, and the electric
heating run when compressor operating frequency is below 50%. (Remark: heating function is
available only with electric heater)
(Note: When the outlet temperature is
≥
65
°
C, enter the air outlet overheat protection system to
stop (compressor and electric heating will stop). When the outlet temperature is
≤
50
°
C, the
protection will be withdrawn and normal operation will resume)