1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23
24
24
25
25
26
27
27
28
28
1
1
2
2
BBT GraphBBT Graph
Phase
Phase
During
menstruation
LOW
LOW
Menstruation
Menstruation
Ovulation
Ovarian
development
Before-after
ovulation
Before-after
ovulation
HIGH
Progesterone
dominance
Before
menstruation
Before
menstruation
cycle
day
cycle
day
10. Phases throughout your cycle
Phases
The phases will appear beginning with your second
cycle. When a possible pregnancy is detected
(heart symbol), the ibasal will not show a phase
number. If the ibasal cannot detect the low and high
phase, number 3 will remain on the display.
The battery lasts for approximately 9 months. When the battery is low, symbol will appear.
/Memo
Slide the battery cover
to remove.
Press the Del button to
stop the procedure.
Select (yes) with the arrow buttons.
Press Set to confirm.
11. Low battery
Grph/Ck
Mode
Set/D T
START
Del
/Memo
Grph/Ck
Mode
Set/D T
START
Del
Press and hold the Set button, and then press
the Reset button with a pointed object.
The ibasal requires a CR2032 battery. Using any other battery may cause a malfunction.
Keep the battery out of the reach of children. If swallowed accidentally, please consult
your doctor immediately. Do not recharge, short-circuit, disassemble, heat or throw the
battery in fire. We are not responsible for deleted data due to a dead battery or other
causes. We recommend that you use the data check function to take note of the data
periodically.
The ibasal will function normally for 4 days after the low battery symbol appears. Only
the clock display will show from the 5th to 8th day. After the 8th day, none of the display
will function properly. Please change the battery within 3 days of the alert. The stored
data does not disappear when you change the battery. The calendar function does stop
when changing the battery - please reset the date and time after replacing the battery.
The battery included has been used for inspection and may not last the full 9 months.
WARNING
5HVHWWKHXQLWDQGVWDUWIUHVKWKLVZLOOGHOHWHDOOVWRUHGGDWD
This process will delete all your saved data. Once the ibasal is reset, set the clock, date and alarm time to start using the unit.
- Page 5 -
CAUTION
Do not disassemble or drop the device.
Avoid getting the ibasal wet. When cleaning
the unit, rinse only the temperature probe.
Keep ibasal away from humidity, direct
sunlight and sudden changes in temperature.
Insert a new battery within 3 days after the
battery symbol appears.
Keep the device away from children.
This device is intended to measure the basal
body temperature (BBT) only. Never use the
ibasal for any other purpose.
Take your BBT every morning to ensure your
fertility status is accurate.
This device is intended to help you pinpoint
your fertile window. If you suspect you are
pregnant, please consult with your doctor.
13. Handle the ibasal with care
HIGH
