3
MAN-AGY-005. Version 01 (01/11/2017)
Network Connection
For a configuration where there is only one agility
TM
unit (one-to-one), the remote and
main unit can be directly cabled. See Diagram below:
Connection and Operation
The remote keypad (AGY-010) can be used to control,
monitor and program up to 32 agility
TM
soft starters.
The unit is powered from the host agility
TM
and
requires an Ethernet cable for communication
(Modbus RTU).
As the remote keypad acts as the Modbus master,
no additional master units must be placed within the
network. Failure to observe this may lead to erratic
behaviour, network failure and/or equipment
damage.
Keypad power must be enabled
on the agility
TM
starter (see below)
Enabling Keypad Power:
Scroll to DEVICE menu
→ KEYPAD menu → KEYPAD PWR = ON
