When you turn on the display, the ebike is powered on at the same time. You can use the throttle or
foot pedal to start the motor (note that the throttle also has a switch, and the motor does not work
when PAS is at 0).
The UrbanCarry is zero start, which means you can use the throttle to switch on the motor directly.
The throttle must be locked when not riding on power.
Make the recharge without removing the battery as much as possible to avoid damage to the cover
or accidents like dropping down the battery.
Charging under U.S. standard voltage
When the ebike is unladen, it is recommended to the set the at gear 1 or gear 2.
When the rear rack is carrying person or heavy things, it is recommended to set the PAS over gear 3 or use
the throttle.
Warning: This vehicle is a Class 3 EBIKES, you shall be cautious when riding at the speeds
over 20mph.
05
Preparation for riding
Check the surface of your ebike
- The side metal cover is not bent or cut.
- The side plastic battery cover is not cut or cracked.
Check the power
Guidelines for safe riding and use
Switch on and off your ebike
Charging instructions
The UrbanCarry uses the oil-hydraulic disc brakes. The left brake lever is connected to the front
brake, the right one to the rear brake.
If there is any problem with the brake system, please contact us for maintenance or replacement in
time.
Brake System
- LCD display shows sufficient power.
- Check the battery power(must be similar to the display).
Basic setting and adjustment
Warning: Children under 12 years old shall not touch the ebike and are prohibited from
riding.