FagronLab™ BASIC – User Manual | 16
FagronLab™ BASIC
FagronLab™ AirDynamic
FagronLab™ ExactDose adapter
The FagronLab™ AirDynamic optimizes batch preparation within the closed
system:
•
Contamination-free transfer
•
Contamination-free storage
It is designed for FagronLab™ jar sizes from 300 to 2000 ml for hygienic
transfer of the compound. The jar is attached to the base plate of the
AirDynamic with the central hole at the bottom of the jar housing. By closing
the easy-lock system on the side of the base plate, the jar is attached
airtight.
The FagronLab™ ExactDose Adapter allows the exact dosage of 0.5 ml paste, gel,
cream or ointment for topical or transdermal therapy.
The adapter will be screwed onto the jar after the mixing process is finished.
Insert the red set screw with a little pressure into the transparent part of the
ExactDose Adapter.
The coloured ball inside the ExactDose Adapter lays on its lowest position when
the red set screw is horizontally positioned.
Pic.: FagronLabAirDynamic
Pic.: FagronLab™ ExactDose
By pressing the pump ball, with its valve screw closed, air is pumped into the lower chamber of the jar. The thus generated
pressure pushes the movable bottom up.
Thanks to the AirDynamic, even thick pastes can be dispensed via the small dispensing opening in the screw cap or transferred to
small jars using the coupling. The material outlet velocity depends on viscosity which may be reduced through warming.
The air pressure that has developed in the lower chamber of the jar can be relieved by opening the valve screw.
This is mandatory after the transfer process using the coupling before the smaller jar is removed. Otherwise this may result in
considerable contamination of the immediate environment, depending on the formulation viscosity.
With pushing the jar bottom upwards the ExactDose chamber will be filled with the exact amount of compound and the coloured
ball will be pushed up to its highest position.
With a 180 degree turn of the set screw the coloured ball will be in the lowest position again, the compound will be extracted by
pushing the jar bottom upwards and the chamber will be filled again with compound for the next dosage extraction.
