Fagor Range Hood, Manual To Installation

Page: 11 / 49

11
4/ CARING FOR AND CLEANING YOUR APPLIANCE
MAINTENANCE
Proper maintenance of the Range Hood will assure
proper performance of the unit.
Filters
The filters must be cleaned approximately once every 30
hours of operation.
Use a warm detergent solution. Grease filters are
dishwasher safe.
Remove filter by pushing filter towards the back of hood
and rotating filter downward.
Duct free (Carbon) Filters
The duct free filters should be changed every 6 months.
Rotate the filters to remove and replace
.
Hood Cleaning
Stainless steel is one of the easiest materials
to keep clean. Occasional care will help preserve its fine
appearance.
Cleaning tips:

Hot water with soap or detergent is all that is usually needed.
 Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to
avoid water marks.

For discolorations or deposits that persist, use a non-scratching household cleanser
or stainless steel polishing powder with a little water and a soft cloth.
 For stubborn cases, use a plastic scouring pad or soft bristle brush together with
cleaner and water. Rub lightly in direction of polishing lines or "grain" of the stainless
finish. Avoid using too much pressure which may mar the surface.
 DO NOT allow deposits to remain for long periods of time.
 DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to
the surface causing rust.
 DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to
remain in contact with stainless steel for extended periods. Many of these com-
pounds contain chemicals which may be harmful. Rinse with water after exposure
and wipe dry with a clean cloth.
Painted surfaces should be cleaned with warm water and mild detergent only.
HALOGEN BULBS
To change bulbs:
1
Use a screwdriver to pull out the lampshade and get off
the glass. CAUTION: BULB MAY BE HOT,PLEASE
ROTATE WHEN THE BULB IS COOL!
2 Replace with a Type JC, 12Volt, 20Watt Max, G-4 Base
bulb. Do not touch replacement bulb with bare hands!
3 Fix the glass and lampshade back the light after
replacing the bulb.
EN