Fagor LVC-21W, Service Manual

Page: 21 / 24

19
12 DETERGENT PUMP NEW LOCATION LVC-21W
Procedure:
1- Open Front Bottom Panel
2- Be sure that the bracket on the pump is the one shown above (part #: Z208909)
3- If not, attach pump to the bracket (side B – Fig. 1) with (2) bolts, (2) washers and (2) nuts
supplied
4- Use screw and nut supplied to hold the bracket (side A – Fig. 1) to the bottom frame of the
dishwasher. First hole of the bracket (Fig. 1) fits with the second hole at the frame.
5- Fit detergent pipes on the pump. Check out above to see which one goes to the tank and which
one goes to the detergent container.
6- TIGHTEN DETERGENT PIPE CONNECTIONS TO PREVENT UNNECESSARY LEAKS
7- Put back Front Bottom Panel
Note:
Rinse aid dispenser is built-in and adjustable too. Turn the button
counterclockwise to get more liquid during the rinsing and clockwise for
less amount. Rinse aid dispenser is located at the left bottom side.
When machine is new, in order to prime the rinse aid press the button.
Pipe going to the tank
New Bracket. Part #: Z208909
Button (screw) to adjust
detergent amount
Second hole; use (1) Screw #Q152004 & (1)Nut
#Q162030 to fix the bracket
A Hole to fix bracket B
Fig.1
Detergent Injector