¥ Why won t the dishwasher start?
This may be because:
— There is no power.
— It isn t plugged in correctly.
— The power fuses have blown.
— The dishwasher is not connected to the mains.
— You haven t pressed the On/Off button (the pilot light for this button must be on continuously).
— The dishwasher door is not closed correctly.
— You have not pressed the Start button.
¥ The dishwasher starts up but no water comes into the appliance
This may be because:
— There is no water supply.
— The stop tap is off.
The water inlet electrovalve filter is blocked.
¥ The water does not drain off and stays in the dishwasher
This may be because:
— The drain is blocked or badly fitted.
— The drainage pipe is blocked or kinked.
— The filters are blocked.
— The selected programme has not ended. Wait until it finishes.
¥ The low salt level pilot light does not go off
This may be because:
— A low salt level. Add salt and stir with a spoon.
— The water hardness is below 7DH, which means that salt is not necessary. In this case,
the light will always be on.
¥ Traces of detergent are left in the dispenser or on the door.
This may be because:
— One of the utensils is preventing the dispenser from opening.
— The detergent is past its expiry date or is not appropriate.
— The sprinklers are hitting the dishes when they turn.
— The sprinkler holes are blocked.
— The detergent container was damp when the detergent was added. The container must
be dry.
¥ Unusual foam appears:
— You have used detergent for washing dishes by hand instead of special detergent for
dishwashers.
¥ The dishwashers uses a lot of salt.
This may be because:
— The lid to the salt container is not closed correctly.
— The salt consumption level is not at the correct setting.
¥ The dishwasher makes strange noises.
This may be because:
— The dishwasher was not installed correctly.
— The sprinklers are hitting the dishes when they turn.
Summary of Contents for LF73DWITU
Page 28: ...02 08 V28F013W3...
