background image

69

English

APPLIANCE MAINTENANCE AND CLEANING

You should perform the
cleaning operations
regularly so that 

your

dishwasher will last
longer

.

You should do the
following every three
months:

DISHWASHER

¥ Clean the filter.
¥ Cleaning the spray arms.
¥ Clean the inside.
¥ Clean the outside.
This will make 

your

dishwasher last
longer

.

I M P O R T A N T

If you are planning
to be away for a long
period, leave the
dishwasher door
open so that the air
can circulate freely
inside the machine.

d

a

1

CLEANING THE WASH FILTER

Take out the bottom rack,
remove the interior filter
by turning it anticlockwise
and pulling it upwards.

Remove the exterior filter.

Remove the filter
protector (some models).

It is essential that filters
are put back in place
correctly.
Make sure the filter
protector is in place.
The exterior filter fits into
position.
Put the interior filter in
position and turn it
clockwise as far as it will
go.

a

b

c

d

The filter is made up of two or three parts (depending on model type): interior filter, exterior filter and filter
protector. It is located at the bottom of the dishwasher under the bottom rack.

b

c

Summary of Contents for LF73DWITU





























Reviews: