Fagor HDWF-CL, Installation Manual

Page: 9 / 76

DOOR
9
English
There is a useful template
with the assembly
instructions.
Fit the corresponding
template (J-120:K-110),
fasten it down and mark
the position of the holes.
Drill, using a Ø 1,16” bit
and screw in the supports
(part which curves
upwards) to the
decorative door.
Take the Decorative Door
and slide the supports
into the door slots. Pull
up until touching the
control panel making sure
that it has been properly
fixed down.
Open the dishwasher
door slowly holding the
decorative door and
finally fix it with the screws
taking care to align the
panel with the door.
h
k
i
j
i
k
I M P O R T A N T
The maximum and minimum weight which is recommended
for the decorative door to be fitted on the dishwashers is:
Maximum 14 lb. Minimum: 6,5 lb.
h
j
A space of at least two millimetres must be left at the
sides between the kitchen fittings or electrical appliances
and the dishwasher.
I M P O R T A N T
In the event that the
door springs are not
strong enough,
compensate for this
with the two additional
screws supplied in the
accessories bag.
Fit the panel on the
kitchen appliance,
tightening it until the
desired measurement
is obtained.
Fix the dishwasher to
the worktop if it is
made of wood. If the
worktop is made of
granite, fix the
dishwasher to the
adjoining furniture.
l
m
n
l m
n n