Fagor HDWF-CL, Installation Manual

Page: 23 / 76

TROUBLESHOOTING
DISHWASHER
When the dishwasher detects a dysfunction, it will display this with sounds or visual signals,
depending on the model.
On the top edge of the dishwasher door there is a table identifying possible incidents.
23
1
TECHNICAL OR FUNCTIONAL PROBLEMS
Models with
display. In these models,
the identification appears
with the letter “F” followed
by a number (from 1 to 9).
Models without
display . When there is a
dysfunction, the
dishwasher will emit a
series of beeps, which
stop for seven seconds
and then sound again. It
is possible to identify the
type of dysfunction by
counting the number of
beeps (1 beep: Door
open; 2 beeps: No water;
etc.)
DYSFUNCTION
Close the door F1 1
MODEL
WITH DISPLAY
NO OF BEEPS
MODEL
WITHOUT
DISPLAY
No water entering F2 2
No drainage F3 3
Overflow F4 4
Overteating F5 5
No heating F6 6
No temperature detection F7 7
Lack of water pressure F8 8
Does not distribute F9 9
( F 1 )
1
To stop the dishwasher
emitting the beeps, press
the Start / Pause button.
Depending on the type of
dysfunction, please
contact the after sales
department to inform
them of your problem.