Fagor HAN 8000, User Manual

Page: 40 / 90

36
Choose a device at device list.
“Save Config”: After committing or confirming set configuration, click this button to save all
configuration into “FLASH” (storage); you do this by front panel.
“Restore Cong.”: renew and start using the configuration. You can read the renewed
configuration by clicking “refresh” or “parse” on operation interface. Please click “Save Config”
if it needs to be saved.
“Reload Config”: reload and use the configuration saved in FLASH. This function is usually used
after “import config”, and the new configuration is effective without restarting the device.
“Import Config”: import configuration of “export config” into FLASH; the imported config can
be used after ‘reload config’ or restart the device.
First please choose the configuration you want to import, and click “Erase” to clear current
configuration and then import configuration from FLASH. At this moment, the configuration
cannot be used. You need restart the device or click “Reload Config” to start new
configuration.
“Export Config”: fetch the device’s configuration to local disk (computer). You can import this