Fagor HAN 8000, User Manual

Page: 12 / 90

8
6
INSTALLATION GUIDE.
6.1
INSTALLATION PREPARATION.

Before installation check possible lose or damage of the device during transportation and read
the complete user manual.

Prepare a suitable environment for installation

Install the device.

Connect the signal cables.
6.2
ENVIRONMENT ENQUIRIES.

It is recommended to take into account the following point related with the installation
environment:

When installing multi-row of racks, please make the distance 1.2~1.5M between front
door and back door, and the distance 0.8M between rack and wall.

The floor of the room where is installed the device should be non-conducting, dust free.
Anti-static material volume resistivity: 1x10
7
÷ 1x10
10
Ω, ground current-limiting
resistance: 1MΩ, floor bearing weight: > 450Kg/m
2
.

Working temperature: for long term operation: 5 ÷ 40º C, for short term operation: 0 ÷ 45º.

Relative humidity: for long term operation: 20% ÷80 %, for short term operation: 10% ÷ 90%.
6.3
GROUNDING REQUIREMENTS.
Good ground wire design is the base of the whole system, and is essential to lightning protection and
anti-interference. The system must follow above principles:

Keep good electrical contact between both ends of outer conductor and shielding layer and the
appearance of metal case of the connected device.

Make sure that connections of both ends of the ground wire are with good electrical contact
and prepare for corrosion prevention treatment.

Do not use other device for ground wire electrical connection.

The sectional area of ground wire from rack connecting to anti-thunder unit must be greater
than or equal to 25mm
2