Fagor FGBV50, Instruction Manual

Page: 46 / 57

• Let the product cool.
W
ARNING: SCALDING HAZARD
B
efore removing the cloth (16L), after use, ALWAYS switch off the steam cleaner and
wait a few minutes until the brush (8) has cooled
.
•
Press a corner of the cloth (16L) with one foot and lift the steam mop to remove
the cloth from the brush (8). [Fig. D5]
CLEANING STUBBORN STAINS
If there are stubborn stains on hard surfaces you can remove them by using the Stain
removal brush (8A).
With the steam cleaner in a vertical position and the brush locked at 45°, rub the stain
with stain removal brush (8A) on the rear part of the brush (8). [Fig. D6]
TO RENEW RUGS/CARPETS
• Place the Microfibre Cloth (16L) on the floor with the Velcro side facing up and
place the brush (8) on it and press lightly, making sure to cover the entire surface of
the brush. [Fig. B3]
• Place the Rugs/Carpets support (9) on the ground.
• Insert the brush (8) in the front part of the rugs/carpets support and press the steam
mop until the Rugs/Carpets support (9) attaches completely to the brush (8) [Fig. D7]
• The rugs/carpets support allows the steam mop to slide easily on surfaces such
as rugs and carpets with short hair.