Description of operation
t e c h n i c a l
15
KG - Drum capacity
6: 6 kg
KG options depending on circuit references /
washing machine model.
HOT WATER
0: Cold water
8: Hot water
If the circuit does not have this option it will
always be 0.
R.P.M. (Revolutions per minute).
These values depend on the hardware
reference and the KGs selected. 1400,
1300, 1200, 1100, 900, 800 ...
DOOR OPENING
0: WITHOUT door opening
8: WITH instant door opening
If the circuit does not have this option it will
always be 0.
RECIRCULATION
0: WITHOUT Recirculation Pump
00: WITH Recirculation Pump
If the circuit does not have this option it will
always be 0.
Circuit checking
(see table 1)
Once the circuit has been configured, it is checked
by pressing the start/pause button for 3 sec. until
the digits stop flashing. After 3 sec. it exits the
configuration process, entering the TSS programme
entrando en el programa SAT (See table 1)
• Fagor T.S.S. Programme:
In order to check the operation of the washing machine’s electric components,
the T.S.S. programme can be activated by following these steps:
1.- General ON / OFF switch (LCD off)
2.- Press the start / pause button and keep it pressed
3.- Hold down the ON/OFF switch until the LCD screen lights up.
4.- Press and hold down the select spin button and wait approx. 2/ 3 sec., until the
letter is displayed on the screen
5.- Release all buttons simultaneously
6.- Press the spin button and wait until the digits on the screen (LCD) appear
(the last button on the right flashes).
7.- Press and hold down the start / pause button until all the digits
on the screen are flashing.
8.- The number 1 will be displayed on the screen – then follow the instructions in
table 1, below.
6
5
4
3
2
1
