Fagor DDS Series, Hardware Manual

Page: 398 / 406

   Sales models
12.
398
Ref.1912
DDS
HARDWARE
· 398 ·
12.10 Unit identification
Each electronic unit is identified by its characteristics plate. It indicates the
sales model and its main technical characteristics.
The versions plate shows the hardware and software versions of the
equipment. For example, the IGBT board mounted in this module has
version 28B (IGB); the software version is 08.09 (SOF).
These two plates fully identify the unit and must be referred to when
repairing or replacing these units. They make it easier to solve compatibility
conflicts between different versions.
The drive is also labeled on its package:
NOTE. The user must make sure that the sales models indicated on the
packing list of the order match those supplied by each unit on its
characteristics plate before making any connection to avoid any possible
shipping errors.
F. H12/22
Unit identification plates. A. Version label, B. Characteristics plate.
F. H12/23
Packaging label of the drive.
A
B