Fagor CR-14 - 2008, Manual

Page: 12 / 50

11. INFORMATION FOR THE
CORRECT DISPOSAL OF ELECTRICAL
AND ELECTRONIC APPLIANCES
At the end of its working
life, the product must not be
disposed of as urban waste.
It must be taken to a special
local authority differentiated
waste collection centre or to a
dealer providing this service.
Disposing of a household appliance separately
avoids possible negative consequences for
the environment and health deriving from
inappropriate disposal and enables the
constituent materials to be recovered to obtain
significant savings in energy and resources.
To remind you that you must collaborate with
a selective collection scheme, the symbol
shown appears on the product warning
you not to dispose of it in traditional refuse
containers.
For further information, contact your local
authority or the shop where you bought the
product.
programmed has been reached. Push
the same button again to stop the coffee
outlet.
•
When the desired amount of coffee has
been brewed, push the stop/start button
(8) to stop the coffee maker and unplug the
appliance from the mains.
7. ADJUSTING THE VOLUME
OF THE COFFEE
The coffee maker will adjust the volume of the
coffee for one or two cups.
• Push the button for one or two cups (6 or 7)
for 3 seconds. The pilot light
(4)
will flash and
the coffee will start to be dispensed.
•
Push the same button again to stop the
coffee being dispensed.
• The coffee machine will memorize the
quantity of coffee it has dispensed and when
the button for one or two cups is pressed,
the adjusted amount will be obtained.
N.B.:
Maximum adjustment volume: 200cc
Minimum adjustment volume: 30cc
To return to the original adjustment push the
button for 1 and 2 cups (6 and 7) at the same
time for 3 seconds. The pilot light (4) will flash
and the adjustment will change when the pilot
light remains on.
8. WARMING CUPS
Place the coffee cups upside down on the
hotplate (3) . When the coffee maker is hot, the
plate will heat the cups which are on it. The
hot cups help create and maintain froth.
9. STEAM
•
Turn the steam adjustment
(5)
to the
position so that the coffee machine reaches
the temperature to generate steam. The
pilot light (4) will start to flash.
• When the pilot light remains constant, the
coffee machine will have reached a suitable
temperature and will be ready to generate
steam.
10. CLEANING AND MAINTENANCE
Before carrying out any cleaning or maintenance
operations, unplug the coffee machine and wait
until the coffee machine cools down.
Never immerse the coffee machine in water or
use abrasive cleaning products.
•
Clean the outside of the coffee machine with
a soft damp cloth and dry well afterwards.
•
Wash the water tank
(10)
, the drip tray mesh
(11), the drip tray (10) and the filters (15 and
16) with warm water and neutral soap.
•
Clean the steam outlet
(9)
with a damp cloth.
• Place the steam outlet into (9) the liquid we
want to heat and turn the steam adjuster
(5) to the position. The steam will be
released and the pilot light
(4)
will flash at
the same time.
• When the liquid is hot enough, turn the
steam adjuster
(5)
to the
O
position and
steam will no longer be released and the
pilot light will remain constant.
11