Fagor CNC 8055 TC Self-Teaching Manual Download Page 69

Page: 69 / 112

SELF-TEACHING MANUAL

·TC· Option

OPERATIONS OR CYCLES.

MODIFYING TOOL WEAR.

This option may be used to change the I, K values. The values entered are incremental and are added to the ones stored earlier.
This option may be executed during tool inspection or while the machine is running.

NOTE: The changes are not assumed until the tool is selected.

•

The CNC goes into tool calibration and shows the data for that tool.

•

Select the I data with the cursor.

•

Key in the I value and press [ENTER].

•

Select the K data with the cursor.

•

Key in the K value and press [ENTER].

•

To change the offset of another tool, select it.

•

Press [ESC] to end it.

(Tool number)

Summary of Contents for CNC 8055 TC

















































































































Search results

Summary of Contents for CNC 8055 TC

Reviews:

Related manuals for CNC 8055 TC

Brands by name

Popular brands

Fagor CNC 8055 TC, Self-Teaching Manual

Search results

Summary of Contents for CNC 8055 TC

Reviews:

Related manuals for CNC 8055 TC

Brands by name

Popular brands