background image

01.2009
C600721I9

PT

ES

PT

A  la  fin  de  la  vie  utile  de  l'appareil,  ce  dernier  ne  doit  pas  être  éliminé  mélangé  aux  ordures 
ménagères brutes. 
Il  peut  être  porté,  sans  coût  additionnel,  aux  centres  spécifiques  de  collecte,  agréés  par  les 
administrations locales, ou aux prestataires qui facilitent ce service. 
L'élimination séparée d'un déchet d'électroménager permet d'éviter d'éventuelles conséquences 
négatives pour l'environnement et la santé, dérivées d'une élimination inadéquate, tout en facilitant 
le traitement et le recyclage des matériaux qu'il contient, avec la considérable économie d'énergie 
et de ressources que cela implique. 

Afin de souligner l'obligation de collaborer à la collecte sélective, le marquage ci-
dessus  apposé  sur  le  produit  vise  à  rappeler  la  non-utilisation  des  conteneurs 
traditionnels pour son élimination. 

Pour davantage d'information, contacter les autorités locales ou votre revendeur.

 

FR

INFORMATION POUR LA CORRECTE GESTION DES DÉCHETS D'APPAREILS 
ÉLECTRIQUES ET ÉLECTRONIQUES

When the appliance reaches the end of its service life, you should not dispose of it with the 
general domestic waste.
It can be taken free of charge to the local administrations' specific selective collection centres, or to 
distributors who provide this service.
Separating a domestic appliance before disposing of it means you will prevent possible negative 
consequences for the environment and health which may be given rise to by incorrect disposal, and 
it means the materials making it up can be treated and recycled, obtaining important savings on 
energy and resources.

To remind you that you must collaborate with a selective collection scheme, there is 
a  symbol  on  the  product  warning  you  not  to  dispose  of  it  in  traditional  refuse 
containers.

For further information, contact your local authority or the shop where you bought 
the product.

UK

INFORMATION FOR THE CORRECT DISPOSAL OF ELECTRICAL AND 

D

C600970I6 05.2010

Summary of Contents for 6FID-31MLS X



















Reviews: