Fagor 6FI-4GLS X, Instructions For Use And Maintanence

Page: 9 / 52

INSTALLATION
UK
8
AT T EN T I ON !
1 . Che c k ing t he le a k a ge w it h a n ope n fla m e (e .g. w it h a m a t c h or a c a ndle ) is
una c c e pt a ble . I t m a y le a d t o a n e x plosion !
2 . Che c k c ondit ion of t he hose a nd c onne c t ion t ight ne ss re gula rly, a c c ording t o t he
va lid re gula t ions.
2 .5 N OZ Z LE REPLACEM EN T
AT T EN T I ON !
Be fore nozzle re pla c e m e nt a nd a djust m e nt s, disc onne c t t he hob from t he m a ins.
Nozzle diameters for particular gas type are shown in Table 2.
Table 2
AUX burner SR burner R burner TC burner
G 20 20 mbar X072 Z097 Y118 K1,35
G 30/31 29/37 mbar 050 065 085 098
The hob is adjusted to the type of gas and pressure stated on the appliance's rating plate.
In the event of a change of the type of gas replace the nozzles and adjust the taps.
Before beginning these activities you must:
–
shut down the cock shutting off the gas supply system or cylinder from the hob,-shut
down all the taps in the hob,
–
disconnect the hob from the mains.
Then:
–
remove the burners' lids and rings,
–
remove the nozzles with socket wrench no. 7 and replace them with new ones in
accordance with table2,
–
put burners' rings and lids back,-
adjust the taps and check the connections for soundness
Fig. 12
2 .6 ADJ U ST I N G CON T ROL K N OBS
ADJUSTING THE TAPS
The adjustment of a gas tap consists in setting the burner flame in the simmering position. To
adjust the taps remove all the knobs and control panel.