
98
Warning: Use only rinse aid designed for domestic dishwashers. Wipe up spilled rinse aid
with a cloth as it will cause the formation of large amounts of foam, and thus will reduce
the dishwashing effectiveness.
If the water hardness is higher than the maximum values given in the table above, or if you use water
from a deep well, it is recommended to use filters and water treatment equipment.
NOTE: The factory settings are for the water hardness level 3.
Water hardness table
Water
hardness
German
degrees
[dH]
French
degrees
[dF]
British
degrees
[dE]
Water hardness level
indicator
Regeneration occurs
every X program
sequence
1)
Special salt
consumption
[g/cycle]
1
0 ~ 5
0 ~ 9
0 ~ 6
H1 Rapid Light bright
No regeneration
0
2
6-11
10-20
7-14
H2 Glass Light bright
10
9
3
12-17
21-30
15-21
H3 Rapid, Glass Light
bright
5
12
4
18-22
31-40
22-28
H4 90 min Light bright
3
20
5
23-34
41-60
29-42 H5 Rapid, 90 min Light
bright
2
30
6
35-55
61-98
43-69 H6 90 min, Glass Light
bright
1
60
The use of detergents
Use a detergent for domestic dishwashers. On
the market you can find detergent intended for
dishwashers in the form of powder, gel and tablets.
The detergent must be placed in the dispenser
before starting the dishwasher. Store detergent in a
cool and dry place, out of reach of children.
Do not overfill the detergent dispenser, otherwise
the detergent may not dissolve completely and
leave streaks on the dishes.
If you need more information on the detergent
used, please contact the manufacturer directly.
1. Close the door, switch on the appliance;
2. Within 60 seconds after the appliance was
switched on press the ‘>’ button for more than 5
seconds to enter the water softener setting mode.
3. Press the ‘>’ button again to select the proper
set according to your local environment, the setting
will change in the following sequence: H3->H4-
>H5->H6->H1->H2;
4. Press the Power button to end the setting mode.
1)
Every cycle with a regeneration operation consumes additional 2.0 litres of water, the energy con-
sumption increases by 0.02 kWh and the program extents by 4 minutes.
Summary of Contents for 3LVF-620M
Page 115: ...115...
Page 116: ...www fagorelectrodomestico com...