Fagor 3LVF-620M, Instruction Manual, Page: 97 / 116

97
Stop using multi-component detergents
Add special salt and rinse aid to dispensers.
Set the water hardness to the highest level (6) and run an empty dishwasher.
Adjust the water hardness.
Adjust rinse aid setting.
8
Add rinse aid to the dispenser and adjust setting
Use rinse aid to prevent the formation of white water drops, lime scale spots, white
streaks that may occur on the dishes, as well as to improve the drying process. Con-
trary to popular belief, it not only serves to obtain a shiny dishes, but also to facilitate
drying. For this reason, make sure there is always sufficient amount of rinse aid in the
dispenser.
Remove the rinse reservoir cap by
lifting up the handle.
Carefully pour in the rinse aid
into the dispenser, whilst avoi-
ding it to overflow.
Close the rinse aid reservoir cap
by rotating it clockwise.
1
2
3
Adjusting the rinse aid reservoir
Remove the rinse aid reservoir cap. Turn the rinse aid indicator dial to a number. The higher the number,
the more rinse aid the dishwasher uses. If the dishes are not drying properly or are spotted, adjust the
dial to the next higher number until your dishes are spot-free. Reduce it if there are sticky whitish
stains on your dishes or a bluish film on glassware or knife blades.