93
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Unsatisfactory washing result.
Hard water.
Increase the amount of
detergent following the
manufacturer’s instructions.
Your laundry is too tightly pa-
cked together in the drum.
Check that your laundry is
spread out.
As soon as the machine is
loaded with water, water dis-
charges.
The end of water drain hose is
too low for the machine.
Check that the drain hose is at a
suitable height. (**) .
No water appears in the drum
during washing.
No fault. Water is in the unseen
part of the drum.
. . . . . . . . . . . . . . . . . . . . .
Laundry has detergent residue. Non-dissolving particles of
some detergents may appear
on your laundry as white spots.
Perform an extra rinse, or clean
your laundry with a brush after
it dries.
Grey spots appear on the
laundry.
There is untreated oil, cream or
ointment on your laundry.
Use the amount of detergent as
instructed on the packaging in
the next wash.
The spin cycle does not take
place or takes place later than
expected.
No fault. The Unbalanced
load control system has been
activated.
The Unbalanced load control
system will try to spread your
laundry. The spinning cycle
will begin once your laundry is
spread. Load the drum evenly
for the next wash.
(*) See the chapter regarding maintenance and cleaning of your machine.
(**) See the chapter regarding installation of your machine.