Fagerhult 86370, User Manual, Page: 6 / 23

6
Subject to change without notice. Version1_20180621
The rotary switch on the sensor is for selecting a finished
package with presets. The functions are according to the
table below. The functions can always be changed in detail
with remote control 86368. If you then use the rotary
switch again, it is that setting that applies. The sensor is
supplied with setting mode 0 which 5 min after the last
presence is detected adjusts to 10%, and 5 min until it
switches off.
Preset functions
Settings rotary switch on 86370 and 86371
Selection of preset 1-F Detection Delay time Standby time Standby dimming level Daylight Threshold
0 100 % 5 min 5 min 10 % Disabled
1 100 % 5 sec 10 s 10 % Disabled
2 100 % 5 min 10 min 10 % Disabled
3 100 % 5 min + ∞ 10 % Disabled
4 100 % 5 min + ∞ 10 % Disabled
5 100 % 5 min + ∞ 30 % Disabled
6 100 % 10 min 30 min 10 % Disabled
7 100 % 10 min + ∞ 10 % LOW
8 100 % 10 min + ∞ 10 % LOW
9 100 % 10 min + ∞ 30 % MID
A 100 % 20 min 1 h 10 % Disabled
B 100 % 20 min + ∞ 30 % MID
C 100 % 30 min + ∞ 10 % Disabled
D 100 % 30 min + ∞ 30 % MID
E 100 % 30 min + ∞ 50 % HIGH
F 100 % 5 sec 10 s 10 % HIGH
PIR
Photocell
LED indicator
Sensor mode selection
Rotary switch preset
HF Sensor module
Infrared receiver