54
You can change the defaults for the level names in the settings
.
Setting up configuration elements
In order to create a new configuration, carry out the following steps:
Click on
System
>
New item
or click on
.
Name the entry, e.g. "Location Aachen”.
Add the new sub-entry by clicking on
System
>
New sub-item
or click on
.
This way, you add a new section to the configuration. Name this "Section 1", for
example.
Exactly as with the section, add another machine (“Machine 1”) and a new
measuring point (“Measuring point 1”) by following the sequence via
New sub-
item
.
The name of the configuration element must not exceed 49
characters.
If you have set up templates, you can use them for your
configurations (see "Planning with templates and routes
").
Manage configuration elements
In the system tree of the Trendline software you can cut, copy or delete
configuration elements. You can find further information in the chapter "Tree
elements
".
4.4.2 Automatic assignment of RFID tags to measuring points
In order to simplify allocation of measuring points in the Trendline configuration to
measuring point in your system, you can add RFID tags to them. The Detector
can read existing RFID tags at the measuring points and automatically assign the
measured values to the correct measuring point in the Trendline software.
146
109
43