146
displayed on the right-hand side of the window.
Edit program settings
Select a group.
Change settings and
click on
OK
.
4.16.1 General
Name
Click on
Name
to specify how new configurations, sections, routes, etc. should
be named when you click on
New
entry
or
New
sub-entry
.
Please note that b alancing plane identifiers on the Detector is
limited to four characters.
Language
Click on the
Language
selection box and select the dialogue language for the
Trendline software.
System of units setting
In this section you can set the units system for the measured values listed.
The following options are available:
Standard SI units,
Standard US units
or
User-defined units
. When making these settings you can assign units from the
range of available units to each measured variable individually.
Default values
Click on
Default values
to set the standards for the alarm threshold
adjustment, comment options and the time signal configuration.
If you create a new measuring point, the following values will be automatically set.