43
Trendline 3
Menu
Menu items and function
First steps
Start using the Trendline Softw are.
Menu bar
Ex plains all menus of the Trendline Softw are.
Toolbar
Ex plains all icons in the toolbar.
Info
Information about the Trendline Softw are.
Toolbar
Frequently used functions of Trendline software can be used via the toolbar.
Go to root lev el
Cut (Ctrl+X)
Create new item
Copy (Ctrl+C)
Create new sub-item
Insert (Ctrl+V)
Add balancing configuration
Delete
Add amplitude/phase configuration
Reset alarm status
Add run up/coast dow n configuration
Send configuration to Detector
Ex pand selected element
Send route/template to Detector
Collapse selected element
Dow nload data from Detector
Mov e selection up
Alarm report
Mov e selection dow n
E-Serv ice
4.2.2.3 Tree elements
In the system tree of the Trendline software you can cut, copy or delete
configuration elements.
Moving or copying configuration elements
You can only move configuration elements if the target is on a higher level, i.e. you
can
move or copy a measuring point (level 4) to another machine (level 3), and
move or copy a machine (level 3) to a different section (level 2).