FAFREES F26 CarbonX, User Manual

Page: 16 / 128

EN 13
Step 6:
Tire reflector installation.
Place the reflector at the highest point between the spokes and
secure it to the spoke behind the reflector.
Step 7: Install saddle.
Open the seatpost clamp lever, adjust the seatpost to a
comfortable height, while ensuring the seatpost is
inserted past the minimum insertion point, as indicated
on the seat post, close the seatpost clamp lever.
Step 8: Inflate tires.
Check that the tire beads and tires are evenly seated on the rims. Use a pump with a Schrader valve to
inflate each tire to the recommended pressure indicated on the tire. Do not overinflated or underinflate
tires.
BATTERY CHARGING
Charging procedure
Follow these steps for charging your ebike battery from Fafrees Bikes:
1. Ensure the battery is off.
2. Remove the rubber cover on the charging port.
3. Plug the charger into the battery
’
s charging port, BEFORE PLUGGING CHARGER INTO
POWER OUTLET.
With the battery on or off the bike, place the charger in a flat, secure place, and connect the DC output
plug from the charger to the charging port on the side of the battery.