3
1
2
3
11
23 EN
English
14. Beverage dispensing - Hot water
Place the appropriate container under the hot water dispenser (
3
). If
necessary, adjust the height of the dispensing nozzle by pulling towards
the basin (
11
).
Press a hot water dispensing icon
.
The programmed dose of hot water will be dispensed from the nozzle
(
3
); it will stop automatically.
Note: dispensing can be interrupted by pressing the
key.
Pressing the
key does not change the programmed parameters.
NOTE
The hot water icons can be personalised with a label for
easier identification.
E.g.:
For activation methods, refer to the CuSTOmER PROGRammING/
CuSTOmISaTION/WaTER/STEam SETTINGS” section.
NOTE: the customisation
and programming
menus can only be
seen if the "
Customer Programming
" item is enabled in the machine
configuration menu, which can only be accessed by the installer technician.
02_QUICK_UNICO_1925_USA.indd 23
19/06/2019 16:36:38
