6
TO STORE OTHER TRANSM ITTER CODES INTO THE SAM E RECEIVER M EM ORY
PREVIOUSLY ENCODED
TRANSM ITTER
RECEIVER
ALREADY
CONNECTED
1
st
CHANNEL (No. 3-4)
POW ER SUPPLY
~24 VOLT a.c.
(No. 1-2)
AERIAL
BLANK
TRANSM ITTER
HOW TO DUPLICATE OR ENCODE NEW TRANSM ITTERS, WHICH ARE TO OPERATE
THE SAM E RECEIVER. IT IS REQUIRED TO PERFORM TW O OPERATIONS IN A
SEQUENCE, AND A PREVIOUSLY ENCODED TRANSM ITTER M UST BE AVAILABLE.
ENCODING OPERATIONS ARE TO BE PERFORM ED AT A RECOM M ENDED
DISTANCE, ie. 10 TO 20 M ETRES FROM THE OPERATIVE RECEIVER AND ARIAL.
1
st
OPERATION
A new transmitter “
A
” (blank, ie. not previously encoded) is available. Press
any tw o buttons simultaneously for 10 seconds. Release the buttons and carry
on the 2
nd
operation w ithin 15 seconds.
2
nd
OPERATION
Transmitter “
B
” (previously enc oded) is available; Press tw o buttons
(corresponding to those in transmitter “ A” ) simultaneously for 10 seconds.
Once the buttons are released, the receiver can read the code from the new
transmitter w hen this is used.
THE ABOVE SEQUENCE OF OPERATIONS IS TO BE REPEATED WITH EACH NEW
TRANSM ITTER THAT IS REQUIRED TO BE USED ALONG W ITH THE EXISTING
ONES.
W HEN TW O BUTTON S ARE PRESSED SIM ULTAN EOUSLY N O RELAY IS
ACTIVATED.
A
B
A
B
– +