- It is most important that the electric cables are removed from their terminals by loosening the fastening screws.
Never cut
the electric
cables. Also make sure that the 230 V mains switch is off before removing the cables. See page 11 pic. 17.
- Only by keeping to these fitting instructions a reliable installation and correct performance of the equipment can be achieved.
The installation is fully under the responsibility of the installation agent, even if only Fadini products have been used as indicated in
this booklet. It is advisable that the system is installed in full compliance with these instructions and in observance of the existing laws
for automatic gate equipment.
- The information, specifications and drawings contained herein are subject to any change that the manufacturer considers as needed.
NEVER CUT THE ELECTRIC CABLES
UNSCREW
LAMP
REFLECTOR
ELECTRIC CABLE
LAMP
PRESSURE SWITCH
ELECTRIC MOTOR
VOLTAGE SUPPLY
CABLE
ELECTRIC CABLE
PRESSURE SWITCH
SAFETY EDGE
WITH PRESSURE
SWITCH
PERFORMANCE
Duty cycle.....................................................................................................................................18 sec. Opening – 30 sec. Dwell – 18 sec. Closing
Time of one complete cycle .................................................................................................................................................................................66 sec.
Complete cycles .............................................................................................................................................................................................No. 47/hour
Annual cycles - 8 hours’service per day....................................................................................................................................................No.159˙000
OIL-HYDRAULIC PUMP
Pump flow rate .....................................................................1.10
l
/min.
Working pressure ........................................................2 MPa (20 bar)
Maximum pressure......................................................4 MPa (40 bar)
Working temperature......................................................-20
°
C +80
°
C
Opening time...................................................................................18 s
Recommended door size...............................................................7 m
2
Shaft rotation........................................................................max. 205
°
Hydraulic oil.....................................................oil Fadini A15 by Agip
Static weight of operator ........................................................10.5 Kg
Weight of Aproli 480 with accessories....................................24 Kg
Max. torque.............................................................................392.4 Nm
Max. gate weight........................................................................150 Kg
ELECTRIC MOTOR
Power output...............................................................0.24 KW (0.33 HP)
Supply voltage ..................................................................................230 V
Frequency..........................................................................................50 Hz
Absorbed power ............................................................................330 W
Absorbed current.............................................................................1.8 A
Capacitor........................................................................................12.5
µ
F
Motor revolution...................................................................1˙350 r.p.m.
IP Protection Standard ..................................................................IP 55
Motor rated torque.......................................................................1.3 Nm
Lamp .....................................................................................230 V - 25 W
Intermittent service .............................................................................S 3
TECHNICAL SPECIFICATIONS
APROLI
480
OIL-HYDRAULIC OPERATOR FOR GARAGE DOORS WITH COUNTERWEIGHTS
APROLI
480
1
FIXING
BRACKET
“M”
2
DOOR OPERATOR
LINEAR DESIGN
MOTOR
W (absor.)
VOLTS
Rev/min.
Nm
2 PHASE
330
230
1˙350
392.4
Protection Standards IP 55
Max. working pressure 4 MPa (40 Bar)
OIL FADINI A15 BY AGIP
MADE IN ITALY
Via Mantova, 177/A - 37053 Cerea (VR) Italy - Tel. 0442 330422 r.a. - Fax 0442 331054
®
s.n.c.
HP (to use)
A
Hz
µ
F
0.33
1.8
50
12.5
A
PROLI
4
80
APROLI
480
3
ELECTRIC
TERMINAL
OUTPUT
4
LAMP AND
LAMP REFLECTOR
5
PROTECTION
COVER
6
LIGHT
DIFFUSION
TOP
COVER
7
BOTTOM
COVER
1
2
3
4
5
6
7
121
785
86
35
86
600
35
180
20 x 20
91
1˙610
“C”
“A”
DATA STICKER
ELECTRIC MOTOR
“E”
14
15
PIC. 22
PIC. 23
