EN
INSTALLATION MANUAL AND INSTRUCTIONS FOR USE
22
NOTE: For safety reasons, the maximum radiator temperature during the 2-hour boost is
limited to 65 ° C.
LED Boost / Timer Operation Summary:
•
Flashing red: “Boost” mode active. The heating element is powered for 120 minutes (the radia-
tor temperature is automatically limited to 65 ° C).
•
Flashing green: “Boost” function active in Timer24 mode. The heating element is powered for
120 minutes
•
Solid green: “Comfort” function active for 22 hours in Timer24 mode.
•
Flashing amber: “Boost” function active in Timer12 mode. The heating element is powered for
120 minutes
•
Permanent amber: “Comfort” function active for 10 hours in Timer12 mode.
Key lock function:
Device buttons can be locked to prevent unintentional changes to settings. Press the [+] and [-]
buttons together for 3 seconds to lock all buttons except the [On / Standby] button.
To unlock the buttons, press the [+] and [-] buttons again for 3 seconds. When the key lock is acti
-
vated, the device beeps twice. When the key lock is off, the device beeps four times.
Additional indications:
•
The two middle LEDs (yellow) blink when a button is pressed: key lock is active.
•
External LEDs (blue and red) blink: temperature sensor fault, heating element is off. Contact
customer support.
Notes:
In the event of a power failure, the system will recover to the previous operating mode *, with the
exception of the “Boost” and “Timer” modes.
* Device status is saved 5 seconds after a modification occurs.
The manufacturer reserves the right to make changes to the product described in this manual, at
any time and without prior notice.
