EN
INSTALLATION MANUAL AND INSTRUCTIONS FOR USE
20
G. Description of control
H. Control operation
Press the [On / Standby] button to turn on the device or to enter the “Standby / antifreeze” mode.
NOTE:
•
When the device is switched to “On / Standby” mode, it beeps twice for 0.5 seconds.
•
When the device is switched to “On” mode (that is, it is turned on), it beeps for 1
second.
“Comfort” mode:
In this mode the desired radiator temperature (fluid temperature) is selected. The temperature value
is set through the [+] and [-] buttons to one of the following values:
40 ° C, 45 ° C, 50 ° C, 55 ° C, 60 ° C or 65 ° C.
The LED that lights up or flashes to the right in the “comfort bar” indicates the selected temperature.
A flashing LED indicates that the corresponding temperature has not yet been reached during the
heating phase. When a certain temperature level is reached, the corresponding LED stops flashing
and stays on.
20
Indicates the selected
temperature
and more information about
accessories
Led “Boost / Timer”:
Small red / green / amber
indicator light
to report on
the current active mode
[+] And [-] buttons:
To configure the
desired temperature
1/2 ”GAS thread
to fix on the radiator
On / Standby
Power cord
Heating element
+
Internal NTC sensor:
Used for control
automatic temperature
“Boost / Timer” button:
To select one of the modes:
“Boost”, “Timer12” and “Timer24”
40º C
45º C
50º C
60º C
55º C
65º C
