www.seagullmodels.com
15
Switch.
INSTALLING THE FUSELAGE SERVO.
INSTALLING THE SWITCH.
Install the switch into the precut hole in the
side, in the fuselage.
THROTTLE SERVO ARM INSTALLATION.
1
) Install adjustable servo connector in
the servo arm as same as picture below:
Adjustable Servo
connector.
Servo arm.
Nut.
Draw center line.
When cutting through the covering to re-
move it, cut with only enough pressure
to only cut through the covering itself. Cutting
into the balsa structure may weaken it.
INSTALLING THE HORIZONTAL STABILIZER.
Wing.
Aileron.
M3 lock nut.
Repeat the procedure for the other wing.
Throttle servo .
Elevator servo .
Rudder servo .
Elevator servo .
Elevator servo .
Rudder servo .
Elevator servo .
Throttle servo .
remove covering.
