&
5HVSRQVLEOH
)RUHVW0DQDJHPHQW
Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd.
General Specifications
Full Bench
Metric
length 2800mm | width 2800mm | height 450mm*
Imperial
length 9’ 2” | width 9’ 2” | height 1’ 5½”
* Not inc100mm below ground level for sub-surface fix option
Approx Weight
242kg
Fixing Centres
See installation dwgs at end of manual
Full Seat (with back)
Metric
length 2800mm | width 2800mm | height 785mm*
Imperial
length 9’ 2” | width 9’ 2” | height 2’ 7”
* Not inc100mm below ground level for sub-surface fix option
Approx Weight
365kg
(+8kg for armrest option)
Fixing Centres
See installation dwgs at end of manual
Detailed Material & Finish Specifications
Bench Slats
• Manufactured from FSC
®
certified tropical hardwood
(other FSC timber options available
upon request)
• Profiled and left untreated as standard
(oil or microporous woodstain treatment available
on request)
• Bench slats supported by and fixed to frame with minimum 4 no. fixing points per slat
Backrest Slats
(Seat only)
• Manufactured from FSC
®
certified tropical hardwood
(other FSC timber options available upon request)
• Profiled and left untreated as standard
(oil or microporous woodstain treatment available on request)
• Backrest slats held together and fixed to seat with 3 no. concealed zinc-coated mild steel threaded tie rods.
Slats separated on tie rods by aluminium spacers and fastened on top by aluminium end caps and underneath
by M12 locknuts
Bases / Frame / Armrests
(Armrest optional - for seat only)
• Frame, bases and armrests manufactured from stainless steel with satin polished finish
• Bases fixed to frame with 2 no. M10 x 25mm button head bolts and locknuts per base
(8 bases / complete
bench/seat)
• Anchored using 2 no. resin fixed M10 x 200mm threaded rods and cap nuts per base
(surface fix)
or 2 no.
zinc-coated steel M10 x 75mm sleeve anchors per base
(sub-surface fix)
• Where armrests are included they are threaded onto the tie rods at one end and fixed at the other end to the
outer seat slat with 2 no. fixing points. There are 4 no. armrest on the complete full tree seat
• Both Full tree bench / seat come in 4 no. sections that are each joined together using 2 no. M10 x 25mm button
head bolts and locknuts through holes in the frame wall
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of bench / seat top, back and bases - check all items for superficial or physical damage.
Three Monthly
Clean all items as detailed below check all fixings are seated correctly; inspect timber for serious damage and
splinters.
Six Monthly
Secure all fixings; full clean as detailed below; check that bench / seat is firmly secured to the ground
2
FULL TREE specification