background image

&

5HVSRQVLEOH

)RUHVW0DQDJHPHQW

Introduction

Design

Design, shop drawings and development by Factory Furniture Ltd.

Manufacture

Factory  Furniture  manufactured  components.  Products  are  assembled  in  Factory  workshops,  checked  and 
dispatched ready for installation. Replacement products or components thereof should be ordered direct from 
Factory Furniture Ltd.

Copyright

The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd.

General Specifications

Bench (Wall)

Metric

     L 2300mm | W 475mm | H 230mm *

Imperial

   length 7’ 6½” | width 1’ 6½” | height 9” *

* Recommended seat height - 450mm (1‘ 5½”)

Approx Weight

  67kg

Fixing Centres

  1800mm (5’ 11”) x 185mm (7½”)

Seat (Wall) 

(with back and armrests)

Metric

     L 2300mm | W 595mm | H 585mm *

Imperial

   length 7’ 6½” | width 1’ 11½” | height 1’ 11” *

* Recommended seat height - 450mm (1‘ 5½”)

Approx Weight

  109kg

Fixing Centres

  1800mm (5’ 11”) x 185mm (

”)

Detailed Material & Finish Specifications

Seat Slats

 

(Also Backrest slats - TORD wall seats only)

• Manufactured from FSC® certified tropical hardwood
• Slats are profiled and left untreated as standard (oil or microporous woodstain treatment 
  available on request)
• Slats screwed to bench / seat frame (4 no. fixing points per slat)

Frame Assembly

• Manufactured from mild steel 

(all welded construction)

.  Frame is hot dip galvanised

• 2 off frame assemblies per bench / seat
• Anchored to base through frame using M10 x 30mm button head bolts:
 

- For ‘Wall’ version these bolt into M10x125mm stainless steel anchor inserts resin fixed into wall / plinth* 

 

  

(

4 no. per bench / seat)

 

- For ‘Gabion’ version these bolt directly into gabion base (4 no. per bench / seat)

 

Please note: Wall / plinth is not included as standard - supplied by others

Gabion Base 

(Gabion versions only)

• Manufactured from mild steel RSA and 75x75mm aperture Ø5mm wire mesh.  All welded construction and 
  hot dip galvanised finish
• Anchored to ground using 4 off M10 x 75mm sleeve anchors
• Please note: Gabion infill stone is not included as standard 

- supplied by others

General Maintenance 

(Recommended Schedule & Guidelines)

Daily/Weekly/Monthly

 (or as adopted)

Visual checks of bench / seat top, back and frame - check all items for superficial or physical damage.

Three Monthly

Clean all items as detailed below check all fixings are seated correctly; inspect timber for serious damage and  
splinters.

Six Monthly

Secure all fixings; full clean as detailed below; check that bench / seat is firmly secured to the plinth / wall or 
gabion

2

TORD WALL specification

Bench (Gabion)

Metric

     L 2300mm | W 475mm | H 450mm

Imperial

   length 7’ 6½” | width 1’ 6½” | height 1’ 5½”

Approx Weight

  132kg

Fixing Centres

  1500mm (4’ 11”) x 335mm (1‘ 1”)

Seat (Gabion) 

(with back and armrests)

Metric

     L 2300mm | W 595mm | H 805mm

Imperial

   length 7’ 6½” | width 1’ 11½” | height 2’ 7½”

Approx Weight

  174kg

Fixing Centres

  1500mm (4’ 11”) x 335mm (1‘ 1”)

Reviews: