factoryfurniture.co.uk
Introduction
Design
Design, shop drawings and development by
Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products
are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products
or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and
drawing copyright remains the sole property
of Factory Furniture Ltd.
General Specifications
Bench
Metric
L 795mm | width 685mm | height 450mm
Imperial
length 2’ 7½” | width 2’ 3” | height 1’ 5½”
Approx Weight
52kg
Fixing Centres
345mm (1’ 1½”) x 270mm (10½”)
Concrete Bench
Metric
L 785mm | width 685mm | height 450mm
Imperial
length 2’ 7” | width 2’ 3” | height 1’ 5½”
Approx Weight
287kg
Detailed Material & Finish
Specifications
Bench Slat Panels
•
Manufactured from FSC® softwood (other FSC
options available including tropical hardwood (e.g.
Cumaru) or Shou Sugi Ban (charred))
•
Slats are profiled and left untreated as standard (oil
or microporous woodstain treatment available on
request).
•
Slats screwed onto galvanised mild steel rails
producing two separate slat panels (top and front).
Slat panels are bolted onto bench body (4 no. fixing
points per panel). Top slat panel can be removed to
enable fixing of bench to ground.
Bench Body
•
Manufactured from mild steel; featuring an all
welded construction and a hot dip galvanised
finish as standard (polyester powder-coated option
available*)
•
Anchored to ground via 3 no. M10 x 75mm sleeve
anchor per bench.
*
Please note that when a powder-coat is applied to a
hot dip galvanised surface pinholing can occur in the
surface finish - this is not considered a defect.
Concrete Option
•
Seat material - Smooth or exposed aggregate
concrete. A variety of stone effects are available
in either smooth, shot peened, honed or polished
finishes. (Please refer to ‘Concrete Finishes’
specification document for further details). Surface
is smoothed and sealed to make it water repellant
•
Internal reinforcement - Galvanised mild steel frame
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of seat top, back and bases - check all
items for superficial or physical damage.
Three Monthly
Clean all items as detailed below check all fixings are
seated correctly; inspect timber for serious damage and
splinters.
Six Monthly
Secure all fixings; full clean as detailed below; check
that bench is firmly secured to the ground.
Specific Maintenance Details
FSC Timber
Clean with a stiff brush once per year, especially in more
exposed locations, in order to prevent a verdigris type
build up on the timber surface. Ideally this should be
completed in early spring. During the cleaning stage,
all exposed timber surfaces should be inspected for
splits and splinters. Any splinters and graffiti should
be removed and the surface sanded with 100 grit
sandpaper in order to remove any uneven / sharp edges
or surfaces.
C005669
Responsible
Forest Management
