Repairs
FSC Timber
For light damage, please see section on specific maintenance details above. For instances of heavy damage,
the timber item should be replaced. Please order against the part number reference in the reordering section
towards the end of this manual.
Stainless Steel
Light damage (surface scratches etc.) can be removed using an emery pad (240 grit) and freeing oil such as
‘WD40’. Care should be taken to follow the direction of the brushing grain. It is recommended that a trial repair
be carried out on an unimportant surface first. No corrosive cleaners or other abrasives should be used. Any
contamination, particularly carbon steel scuffs from vehicles, should be quickly removed to avoid corrosion.
Polyester Powder Coated Surfaces
For light damage (scratches, chips etc.) repair using touch-up paint to match original colour (available from
Factory Furniture Ltd). Paint application should be carried out in accordance with approved methods detailed
by the paint manufacturer. Please note that it is advisable to use professional painters to achieve best results
when touching up larger areas. Products for respraying larger areas are available from Factory Furniture Ltd.
Heavy Damage
In the event of serious damage to any component, replacements should be ordered from Factory Furniture Ltd.
In this event (or if the product needs to be disassembled for any reason), please contact Factory Furniture for
detailed technical advice.
Reordering / Spares
Part No.
Item Description
P2000 / 01
1 no. Skop table slat set (not including frame) - (2 no. end slats and 26 no. mid slats total)
Instructions For Reordering
If possible, please specify job name or number at the time of reordering to enable identification of details such
as the original species of timber used, stainless steel finishes and polyester powder coat colours etc. In any
event where either, additional orders are required, or spares and replacements are required please contact
Factory Furniture Ltd. Using the part numbers given above as reference should help us to process your enquiry
more efficiently.
Note - All fittings required to assemble ordered parts will automatically be included in the order.
AutoCAD Drawing List
FF2000 / 01
SKOP TABLE
FABRICATION DRAWINGS
FF2000 / 02 SKOP TABLE
FRAME FABRICATION DRAWING AND SLAT DETAILS
FF2000 / 03
SKOP TABLE
BASE SETTING OUT
Contacts
Factory Furniture Ltd
5 Pioneer Road
Faringdon, Oxon
SN7 7BU UK
Tel
+44 (0) 1367 242731
Email [email protected]
Web www.factoryfurniture.co.uk
3
SKOP TABLE repairs
