background image

FC-RIDERS-v2-OP-EN v22.235 

- 45 -

MILITARY GRADE CENTRAL COMMAND - STATUS LIGHT CODES 

Status Light Guide

Below is a list of self-help actions. Try to use this list before you contact your service agent. Go to the number in the list 

which matches the number of indicator light flashes and follow the instructions.

The battery needs charging, there is a bad connection to the battery or dependent on 

programming, may indicate that the battery lockout function is active and the controller is 

in a restricted mode of operation. Check the connections to the battery. If the connections 

are good, try charging the battery.

There is a bad connection to the motor. Check all connections between the motor and 

the controller.

The motor has a short circuit to a battery connection. Contact your service agent.

The battery charge level has fallen below the Battery Lockout Level and the controller is 

inhibiting certain machine functions. Charge the battery.

Not Used.

The controller is being inhibited from driving, this may be because the battery charger is 

connected.

A throttle fault is indicated. Make sure that the throttle is in the rest position before 

switching on the machine.

A controller fault is indicated. Make sure that all connections are secure.

The parking brakes have a bad connection. Check the parking brake and motor 

connections. Make sure the controller connections are secure.

An excessive voltage has been applied to the controller. This is usually caused by a poor 

battery connection. Check the battery connections.

1 Flash

2 Flash

3 Flash

4 Flash

5 Flash

6 Flash

7 Flash

8 Flash

9 Flash

10 Flash

Summary of Contents for GTR



















































Reviews: