Remote Control
Output and Input select
A. Select the zone OUTPUT where you wish to change the source (Number 1-8 correspond
to the zone outputs 1-8)
B. Select the zone INPUT where you wish to change the corresponding output (Number 1-8
correspond to the zone inputs 1-8)
C. Press PTP button if you wish to instantly mirror all inputs and outputs (Example: Input 1 to
Output 1, Input 2 to Output 2 etc.)
NOTE: 1.
EDID Set Up from the remote control is not available for HDBASET-8X8MATRIX
2. The button press sequence should be finished in 5 seconds, otherwise the operation is cancelled.
