5
www.factorelectronics.com
Panel Descriptions
TX (Transmitter)
①
L/R Audio Out
– RCA connector, connects to AVR for audio breakout of Audio Return
Channel from ET0101-GD4A at ARC mode. Or audio breakout from HDMI input at Local
mode..
②
Optical Out -- TOSLINK audio out. Connects to local a AVR when using Audio Return
Channel (ARC) feature. Or extract the audio from the HDMI input using Local mode.
③
Local/ARC switch selection -- Switch to left/right side to select Local mode/ ARC mode.
When using ARC feature, the switch should be set to ARC mode.
④
HDMI input
– Connect to an HDMI source device
⑤
HDMI input LED indicator
– Lit when the HDMI source is connected.
⑥
HDMI output
–Connect to a local HDMI display device
⑦
HDMI output LED indicator
– Lit when the HDMI display device is connected.
⑧
Non ARC/ ARC selection switch
– When the AVR does not support ARC, set the switch to
the left side (NON-ARC). When the AVR supports ARC, set the switch to right side (ARC)
to use the ARC (audio return channel)feature
⑨
Ethernet port
– RJ45 connector. Connect to local network switch to extend 10/100
network to HDBaseT Receiver Ethernet ports.
⑩
Normal/ Long Cable selection switch
– Switch to left/right side to select Normal mode/
Long Reach mode. When selecting Long Cable mode, the selection switch on RX
receiver balun should also be set to Long Cable Mode at the same time.
